Make sure this fits by entering your model number.
⚙️【 3/4 HP Power High Efficiency】- Portable and energy saving Maximum capacity of transferring water up to 3600 GPH with a 1.5 inch discharge hose and Max delivery height is 26ft, 2200 gallons per hour on a 10ft discharge lift.
⚙️【Powerful Motor with Thermal Protection】- Powerful motor can bring better and more lasting work to the pump. Thermal protector ensures that the pump will not be burned out. Even when the pump trigger thermal protector, pump will rework after cooling down.
⚙️【Upgraded Sealing Structure】- The pump features a durable sealing structure that ensure that the submersible pump has longer life time and more effective pumping, so that pump can be used for farms, swimming pools, fountains, flooded basements, and drainage in typical residential or commercial water transfer applications.
⚙️【Automatic or Continuous Manual Operation】- Two working modes. For the customers who don't like to use float switch, you just simply attach it on its side slot, So that the pump becomes manually controlled by cable plug. When floater is on its side slot, pump becomes compulsively at "ON" position all the time. This can be used when water level is low and not enough for floater freely floating in the water.
⚙️【GHT 3/4", NPT 1" and 1.5" Hose Adapters included】- With 1.5" discharge port will give pump maximum output flow rate. Pump can be worked in water that contains small dirt or solid less than 35mm. Pump also comes with a long 26.2ft cable cord, it can be installed for automatic operation or used in temporary situations.
|||
Product Description
Min Water Level for Auto Start
Minimum Water Level for Float Switch Automatically Starts from 50 cm/20 in.
If the water level is not enough, you need to hang up the float to the "ON" position and make it manually controlled. Just be careful to dry running with this mode.
Min Residual Water Level for Manual Mode
Pump water down to 5 cm/0.2 in in by Manual Mode.
If the water level is not enough, you can choose manual control. Just be careful to dry running with this mode.
Performance Data
The maximum output with 1.5" discharge port is 3300 GPH.
We always suggest to use biggest discharge port and larger hose in order to have optimum performance！
Read more
Solid Passage
The pump is designed also to work with dirty water. Its Maximum solid passage is 35 mm. So it will be suitable for mostly water conditions for your daily domestic application. Small sand, some muddy water, or particle all can pass through the pump.
Don't use the pump for any salt water, chemical or acid liquid, it may reduce the lifetime of pump.
Space Size needed
It's better to have a sump or tank size 40x40 cm (16x16 in), so that the float switch can be freely float in the water.
The distance between the float switch and the pump should not be too small since the switch should be able to move freely. Also make sure that the float switch does not touch the floor.
Setting ON/OFF Operating Point
The ON/OFF operating point of the pump can be readjusted by extending the cord of the float switch.
Raise the float switch carefully and check if the pump switches on then lower it again to check if the pump swtich off before pumping water.
Read more
Transferring water from Rain Barrel for garden irrigation.
